Source display hardware for residential lobbies, stairwells, estate agency windows and property sales centers. Qtenboard supplies wall-mounted, floor-standing, embedded and dual-screen display configurations for property portfolios, estate and sales suites worldwide. Share your installation points, target market and project quantity to move directly into configuration, sample and OEM/ODM discussion.
Whether you are standardising displays across a multi-building portfolio or fitting a single estate agency window, the procurement path is the same: confirm the application, lock the hardware configuration, test the sample against your CMS or property platform, then roll out building by building.
Property portfolio procurement is driven by configuration consistency across buildings, not by advertising-first thinking. A housing association, property company or facility manager typically standardises on one display model and one mounting approach, then rolls the same configuration out stairwell by stairwell. That structure changes what matters in a supplier conversation: the buyer needs to know the model selected for the first two entrances will remain available, unchanged, for the remaining twenty.
The common procurement constraints are consistent across residential portfolios:
Qtenboard configures indoor wall-mounted digital signage for lobby and stairwell installation, and vertical indoor display formats for entrance areas where a slim, floor-standing or recessed profile is required. For projects that combine tenant notices with building information, a dual-screen indoor digital signage configuration separates the two content streams without requiring two separate installations.
| Procurement check | What the page should confirm |
|---|---|
| Montering | Overall dimensions, depth, VESA pattern or recessed structure drawing |
| Skjerm | Available sizes, resolution, brightness per model |
| Systemet | Operating system and version, processor platform, RAM and storage |
| Tilkobling | Wired network, Wi-Fi, optional communication modules |
| Vedlikehold | Front or rear service access, port location, lockable enclosure |
| Operating environment | Rated operating hours, working temperature, suitable installation zone |
| Vern | Glass, front-panel or full-enclosure protection documentation per model |
| Software fit | Tested CMS or property platforms, test conditions and responsibility boundary |
Customisation options: housing colour, logo, recessed mounting structure, port position, pre-installed operating system, customer software testing and packaging.
Estate agency window displays introduce a different set of procurement variables: glass reflection, daylight intensity and heat build-up behind glazing. Window-facing projects typically fall into two brightness bands depending on window orientation and the distance between the screen and the glass. As a market reference — not a Qtenboard model claim — window-facing displays commonly require approximately 2,500–4,000 nits or higher for direct daylight conditions, while shaded or north-facing windows may operate in the 1,500–2,500 nit range. The correct band is confirmed against the actual installation point, not selected from a catalogue headline.
The procurement questions that determine a window display order are:
Qtenboard configures high-brightness window display hardware for estate agency windows and sales-suite glazing. The configuration is quoted against the actual window condition rather than a blanket brightness promise, and glass-mounted units are not described as outdoor displays unless the model and enclosure are specified for that environment.
Sales centers and temporary display units place a different demand on hardware: the equipment moves frequently, the network environment is not guaranteed, and the display must run the buyer’s existing floor-plan, tour or sales software rather than a generic content loop. Procurement here focuses on transport protection, quick deployment and software pre-installation.
Typical requirements include:
Qtenboard configures mobile and temporary display formats for sales-center deployment, including touch kiosk variants where the project requires interactive floor-plan or directory access. The software boundary is agreed in advance: the hardware can be supplied with the customer’s authorised software pre-installed and boot-tested, but Qtenboard does not claim to provide VR tour, sand-table interaction or a complete sales platform unless those functions are part of the supplied configuration.
Commercial property directory and wayfinding projects sit at the edge of the property portfolio: the display hardware is still Qtenboard’s supply scope, but the directory software, floor data and backend maintenance are normally provided by the buyer or a third-party platform. The procurement conversation focuses on the kiosk structure, touch specification and service access.
Qtenboard supplies the display and touch hardware boundary for directory kiosks; the software, floor data and content management remain outside the default scope unless explicitly agreed.
Customisation is quoted against a defined boundary rather than a blanket “fully customisable” claim. The table below sets out what is typically available and where a project moves from standard configuration into re-engineering and re-testing.
| Customisation item | Boundary to confirm |
|---|---|
| Appearance and branding | Housing colour, logo, front frame, labels |
| Mounting structure | Wall-mounted, hanging, recessed, floor-standing base and cable routing |
| Display and touch | Available panel specifications, single/double-sided, touch options |
| System and interfaces | Operating system, processor platform, port changes |
| Software pre-installation | Customer-authorised software, boot settings and compatibility testing |
| Packaging | Neutral, branded or project-specific labelling |
| Documentation | Specification sheets, structure drawings, installation files, model-specific compliance documents |
Standard options, re-designed options, MOQ changes by customisation depth, and whether a structural or configuration change requires re-testing and updated compliance documents are confirmed in the quotation.
The delivery process is structured around what the buyer receives or confirms at each stage, not around a generic capability statement.
| State | What the buyer receives or confirms |
|---|---|
| Requirements review | Installation points, quantity, target market, existing CMS or property platform, installation conditions |
| Configuration & drawing approval | Configuration sheet, structure drawing, hardware and software responsibility boundary |
| Sample testing | Display, system, mounting and customer software compatibility test |
| Pilot order | Configuration consistency and deployment feedback |
| Bulk production | Agreed inspection, testing and packaging records |
| Shipment | Packing list, applicable documents, agreed logistics terms |
MOQ for standard, branded and structurally customised configurations, sample and bulk lead times with their start conditions, warranty and spare-parts terms, and the scope of hardware, software and freight included in the quotation are confirmed internally and stated in the proposal.
Procurement verification is answered through evidence rather than claims. The table below maps the common buyer question to the document or record that can be presented.
| Procurement question | Evidence available |
|---|---|
| Can production be verified? | Production, assembly, testing and packing photos from the actual build |
| How is batch configuration controlled? | Order configuration sheet and inspection or traceability records |
| What testing is performed before shipment? | Actual test process and available records for the model and configuration |
| Which compliance documents apply to the target market? | Model- and configuration-specific compliance document list |
| How is after-sales handled? | Warranty terms, spare-parts policy and fault-handling process |
Compliance documentation is listed against the exact model and configuration quoted; a project is not described as holding a blanket certification across the full product range.
Property digital signage projects tend to follow a consistent pattern worldwide: housing associations and property companies replace analogue notice boards in stairwells and entrances with networked displays, and they expect the hardware to sit within the same upgrade cycle as access, booking and property-management systems. The three references below are public deployments from Sweden — they illustrate the deployment and procurement patterns Qtenboard configures hardware for, and are not Qtenboard customer projects.
Brf Kronan, a housing cooperative in Tumba south of Stockholm, needed to replace worn mechanical postboxes across three buildings and eight stairwells. The association extended its existing VAKA® system and integrated digital information displays directly into the postbox chassis, so each stairwell has its own display showing building-specific notices — lift renovations, planned water shutdowns and similar messages — with scheduling handled remotely. The same access tag covers entrances, recycling rooms and postboxes.
Procurement signal: embedded mounting, per-stairwell configuration, scheduled content, integration with existing access and postbox systems.
HSB Brf Gäddan in Stockholm is installing digital displays in all entrances as part of an access-system upgrade, replacing the current notice boards. The screens carry name registers, resident information and general contact details, and the board can push individual messages to specific stairwells. Laundry rooms are also being fitted with digital booking screens using the same upgrade cycle.
Procurement signal: entrance-area display, name-directory capability, per-stairwell targeting, coordinated with access-control hardware.
Signostium, working with municipal housing company Stångåstaden in Linköping, piloted connected signage for apartment doors and entrances in two stairwells at Ebbepark. The signs are powered by indoor-light solar cells and updated wirelessly via LoRaWAN, removing the manual replacement work that property caretakers previously performed for every tenant change.
Procurement signal: low-power hardware, wireless update path, reduced manual maintenance across a residential portfolio.
Across the references above, the hardware questions that determine a property display order are consistent:
For procurement teams evaluating elevator and stairwell communication, the elevator digital signage deployment guide covers the mounting, wiring and content-zoning decisions that apply to multi-storey residential buildings. Where the screen specification is still open — single vs dual, Android vs Windows, screen size and chipset — the elevator LCD screen selection framework sets out the trade-offs that property managers typically raise during sample approval.
The common pattern is framework-first, rollout-second. A property company or housing association establishes a hardware and integration standard across its portfolio, then rolls out building by building. That structure affects how a quotation is built:
For projects that extend beyond residential buildings into estate agency windows, sales suites or commercial property directories, the same framework logic applies but the hardware emphasis shifts. The real estate digital signage application overview sets out the display formats used across these scenarios, from lobby screens to window-facing units and interactive kiosks.
The case references above are public market deployments and are not presented as Qtenboard customer projects. They are included to show the deployment and procurement patterns that Qtenboard configures hardware for. Model-specific capabilities, brightness ranges and compliance documents are confirmed against the exact configuration at quotation stage.
What is the MOQ for standard vs. customised displays? MOQ depends on the configuration depth: standard models, branded models and structurally customised models carry different minimums. The exact MOQ is stated in the quotation against the confirmed configuration.
Can you pre-install or test our existing CMS or property platform on a sample? Yes, where the platform and test conditions are agreed in advance. The sample is configured with the buyer’s authorised software and boot settings, and the compatibility test scope is confirmed before the sample ships.
Which compliance documents are available for the exact model and configuration? Compliance documents are listed against the specific model and configuration quoted. A project is not described as holding blanket certification across the full product range; the applicable document list is provided with the proposal.
What affects sample and bulk lead times? Lead times are driven by configuration complexity, panel and component availability, software pre-installation requirements and the approval cycle. Start conditions for both sample and bulk production are stated in the quotation.
Can you provide installation drawings and structural files? Structure drawings, mounting templates and installation documentation are provided for the confirmed model and mounting configuration.
What are the warranty and spare-parts terms? Warranty terms and spare-parts policy are stated against the model and configuration. The fault-handling process and spare-parts availability are confirmed as part of the quotation.
Sourcing for a Property Display Project?
Send your installation points, building count and existing property or access system. We will confirm the available configurations, sample conditions and documentation scope for your project.