Industrial displays fail when they are specified like office screens. Dust, moisture, heat, 24/7 duty and gloved operation kill ordinary monitors in months. Qtenboard builds IP65-front industrial panel PCs, open frame and panel mount monitors engineered for the factory floor — fanless, wide-temperature, with Windows / Linux / Android and factory-level OEM/ODM customization. Send your project specs and get a quote in 24 hours.
If your deployment suffers from downtime, ghost touches or early panel failure, the root cause is usually the display being matched to the wrong environment — not the screen size. These four failure modes are what Qtenboard industrial monitors are designed to eliminate.
Office-rated enclosures let dust and washdown water into the electronics. IP65-front industrial touchscreen monitors keep the touch surface and internals sealed for production and food-processing areas.
Cooling fans clog, thermal throttling slows the HMI. Fanless industrial panel PCs run 24/7/365, and every unit passes a 24-hour burn-in aging test before shipment.
Capacitive screens misread oil, moisture and gloved fingers. 10-point PCAP industrial touchscreens are tuned for gloved and wet operation, with IR or non-touch options for special cases.
Consumer boards lack the ports and mounting patterns machines need. Industrial panel PCs expose flexible I/O and standard VESA / open-frame mounting for kiosks and control panels.
The fix is a display built for the environment, not a bigger screen. Qtenboard configures each unit around your installation and operating conditions before it goes into production.
Three standard industrial display configurations cover most B2B deployments. Pick the form that matches your installation, then Qtenboard customizes size, brightness, touch and I/O around it.
For kiosks, vending, ticketing and machine embedding. No outer bezel — integrates flush into your enclosure with custom brackets, sizes from 10.1" to 27" (up to 110" on request).
For HMI control panels and machine consoles. Front IP65 dust & water protection, panel cutout mounting, fanless operation, 10-point PCAP and flexible I/O for PLC connection.
For control rooms, SCADA walls and coordination stations running 24/7. Standard VESA mounting, wide viewing angles, multi-interface (HDMI / VGA / USB) and optional high brightness.
Every deployment region stresses displays differently. Qtenboard maps each environment to a concrete configuration before quoting — so the unit you receive is built for your site, not a generic panel.
Wide-temperature builds with sealed internals for sub-zero operation down to -35°C and condensation-heavy coastal or tropical sites — a common requirement for Nordic and Southeast Asian projects.
High-brightness industrial displays up to 1500-nit for outdoor kiosks and window-facing units, with IP65/IP66 waterproofing tested and documented for semi-outdoor models.
Front IP65 protection keeps the sealed touch surface running in milling, food and chemical plants where dust and hose-down cleaning are routine.
Fanless thermal design plus a 24-hour high-temperature burn-in per unit, with dissipation data recorded in the quality file.
10-point PCAP tuned for gloves and oil; IR or non-touch variants available for extreme cases.
High-temperature performance verified for hot climates, maintaining brightness and thermal stability in 45°C+ environments.
| Your scenario | Recommended form | Key configuration | Typical sizes |
|---|---|---|---|
| Machine-level HMI / control cabinet | Panel mount industrial panel PC | Front IP65, fanless, 10-point PCAP, flexible I/O | 10.1"–21.5" |
| Kiosk / vending / ticketing embed | Open frame monitor | Custom bracket, capacitive touch, high brightness option | 15.6"–27" |
| Control room / SCADA wall | VESA wall-mount display | 24/7 operation, wide viewing angle, HDMI/VGA/USB | 21.5"–55" |
| Outdoor / window-facing | Open frame + high brightness | 1500-nit, IP65/IP66, wide temperature | 21.5"–55" |
| Cold storage / Nordic sites | Wide-temperature panel PC | -35°C operation, sealed internals, gloved touch | 10.1"–21.5" |
Sizes beyond 27" up to 110" available on request. Not sure which form fits? Send a photo or drawing of your installation and Qtenboard will recommend a configuration.
Qtenboard is a vertically integrated industrial display manufacturer, not an assembly shop. Non-standard requests are engineered in-house — no subcontracting of reliability-critical steps.
Quality claims are only as good as the process behind them. Qtenboard publishes its QC flow and metrics, and issues test reports in the manufacturer's own name.
Every mainboard and finished unit is tagged with a traceable identifier linked to production data, component sourcing and test results — so field issues can be resolved fast.
These scenarios are built from verified Qtenboard capabilities and typical B2B deployments. See published cases at our case center for completed projects.
Challenge: control consoles failing in a dusty, high-heat plant — ghost touches and fan failures every few months.
Solution: panel mount industrial panel PC with front IP65, fanless design, glove-tuned 10-point PCAP and flexible I/O to the PLC.
Outcome: 24/7 continuous duty and a sealed front that keeps dust and washdown out of the electronics.
Discuss a similar retrofit →Challenge: an integrator needed a sealed display that embeds flush into a kiosk and ships under the integrator's own brand.
Solution: open frame monitor with custom bracket and enclosure color, pre-loaded firmware, custom boot animation, Android 16 with OTA/MDM.
Outcome: ready-to-deploy units with less on-site configuration across a multi-unit rollout.
Talk to our OEM team →Challenge: Nordic and Southeast Asian sites with sub-zero winters and high-humidity summers.
Solution: wide-temperature builds, sealed internals, operation down to -35°C, humidity-resistant components.
Outcome: reliable continuous operation across climates — a configuration Qtenboard routinely ships to cold and tropical markets.
Get regional configuration advice →Standard industrial panel PC sizes cover 10.1", 12.1", 15.6", 18.5", 21.5", 23.8" and 27", with the production line supporting 5" to 110" formats. Resolution, touch, brightness, mounting and I/O are configured per project.
Windows, Linux and Android (9.0 through 16.0). We can pre-load applications, customize the launcher, set branded boot animations and configure OTA/MDM compatibility at the factory before shipment.
Yes. Enclosure materials include aluminum, steel and stainless with custom colors and finishes; mounting covers open frame, panel mount, VESA and custom brackets; branding includes logo printing, boot animation, UI theme and custom packaging. OEM, ODM, CKD and SKD models are all supported.
Standard configurations ship in under 14 days. Daily output exceeds 200 units with an annual capacity of 500,000+ units across 5" to 110" lines, and capacity can ramp further for large tenders.
CE, FCC, RoHS, ISO 9001:2015 (TÜV Rheinland-issued), ISO 14001:2015, PSE, CB and ENERGY STAR. Test reports are issued in the manufacturer's own name and can be verified on the issuing bodies' public databases.
Minimum 1–3 years warranty depending on configuration, local distributors for repair and replacement, spare parts for bulk orders, remote technical support and system upgrades, plus a 24/7 online service team.
MOQ depends on the configuration. Sample orders are supported to validate the design before volume production — send your spec and our team will confirm terms for your quantity.
Send your project specs (size, mounting, environment, touch, OS, quantity, target market) through the contact form or email below. You will receive a configuration recommendation and a quote within 24 hours; distributor and agent inquiries are handled by the same team.
Join Qtenboard's distributor and agent program — territory support, local repair and replacement service, spare parts and multilingual back-office support.
Include these details and we will map your project to a configuration before quoting:
Multilingual sales team · 24/7 online service · OEM/ODM long-term support